Powerflex Race Series Front Lower Wishbone Rear Bush to fit the following:
Alfa Romeo 147 (2000-2010), 156 (1997-2007), GT (2003-2010)
Notes: We have found that there can be a difference in the end-pin diameter on some wishbones, especially non-genuine replacements. We supply PFF1-812 with the more popular 20mm bore sleeve, but we have seen wishbones with 21.3mm end pins. If you find the ones supplied are incorrect for your vehicle, please contact us by email with the dimensions required and we will send you a set of the correct sized sleeves free of charge. PFF1-812 also comes with different sized adaptor rings to suit different sized brackets. Use the smaller ring (1-802B) with the aluminium bracket and the larger ring (1-802C) with the pressed steel bracket. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM
Please Note: The prices shown on our website are for the quantity required for the vehicle. ie – if the Quantity Required is 4 and the Quantity in Pack is 2, you will receive 2 Packs.
Quantity Required: 2
Quantity in Pack: 2
Diagram Reference: 2
MG Auto Motorsports is an authorised dealer for POWERFLEX. Buy from us to ensure that you are purchasing a genuine POWERFLEX product.
POWERFLEX Race Series
Black Series Developed for Race, Rally & Circuit
>> 80% More Resistant
>> 25% Stiffer
>> Engineered to be the Best!
The most precise and accurate alignment for your chassis!
For the Ultimate in Bush Performance
POWERFLEX Black Series bushes are manufactured using a 95 Shore A Compound to provide maximum control of chassis geometry
If you requirements are purely for the ultimate in hadling and chassis performance then the Black Series is for you.
EPTG Ltd (European Polyurethane Technologies Group) was formed in the UK in 1996 to take advantage of the significant advances made in the development of polyurethane in recent years.
The company has wide experience of automotive suspension and chassis systems and combining these design skills with advanced polyurethane manufacturing techniques led to the development of the wide range of high performance automotive polyurethane components now known the world over by the product name POWERFLEX.
The company operates in a self-contained state of the art factory, manufacturing everything in-house.
The stainless steel components are machined on the latest computer controlled equipment to ensure perfect repeatability and quality.
The moulding and tooling, design and manufacturing is carried out within the factory ensuring very rapid response time to special projects and complete communication between development, prototyping, testing and manufacturing departments. Component manufacturing is carried out with the latest automatic processing equipment ensuring 100% right first time quality. Testing of new components is carried out both on the vehicle and on test rigs.
POWERFLEX were selected to receive a Queen’s Award for Enterprise International Trade 2013 and in December 2014 certified to ISO 9001 as a manufacturer underlining their quality and stature as a global exporter.
For those unfamiliar with this it is an international standard to show that the company operates to a system of quality procedures.
For smaller companies this can be straightforward but for a company of our size with complex manufacturing and over 2500 part numbers, it is a big achievement especially as this was done with no major changes to our rigorous quality procedures.
We were awarded this on our first assessment inspection with no changes or recommendations to the way the business operates. This is a testament to the way we run the business and especially the people within it.
All of these factors combined make POWERFLEX the number one selling performance bushes in Europe.
For more information about POWERFLEX, please visit their website at https://www.powerflex.co.uk/