SuperPro Complete Lower Control Arm Kit: Lightweight Alloy Adjustable with DuroBall ALOY0018K

£666.18 inc VAT

SKU: ALOY0018K Tag: Product ID: 377484

Description

The SuperPro Complete Lower Control Arm Kit: Lightweight Alloy Adjustable with DuroBall is designed to fit the following vehicles:

Volkswagen Golf, MK7 1.0 TSI Estate FWD 2015-2016
Volkswagen Golf, MK7 1.0 TSI Hatchback FWD 2015-2016
Volkswagen Golf, MK7 1.2 TSI Hatchback FWD 2012-
Volkswagen Golf, MK7 1.2 TSI Hatchback FWD 2014-2016
Volkswagen Golf, MK7 1.2 TSI Estate FWD 2013-2016
Volkswagen Golf, MK7 1.4 TSI Estate FWD 2013-
Volkswagen Golf, MK7 1.4 TSI Hatchback FWD 2012-
Volkswagen Golf, MK7 1.4 TSI Estate FWD 2013-2016
Volkswagen Golf, MK7 1.4 TSI MultiFuel Hatchback FWD 2013-
Volkswagen Golf, MK7 1.6 TDI Hatchback FWD 2012-
Volkswagen Golf, MK7 1.6 TDI Estate FWD 2013-2016
Volkswagen Golf, MK7 1.6 TDI Hatchback FWD 2013-2016
Volkswagen Golf, MK7 1.6 TDI 4motion Estate 4MOTION 2013-2016
Volkswagen Golf, MK7 1.6 TDI 4motion Hatchback 4MOTION 2012-
Volkswagen Golf, MK7 1.6 TDI 4motion Hatchback 4MOTION 2013-
Volkswagen Golf, MK7 2.0 GTD Estate FWD 2015-2016
Volkswagen Golf, MK7 2.0 GTD Hatchback FWD 2013-2016
Volkswagen Golf, MK7 2.0 GTI Hatchback FWD 2013-2016
Volkswagen Golf, MK7 2.0 GTI Hatchback FWD 2013-
Volkswagen Golf, MK7 2.0 GTI Clubsport Hatchback FWD 2016-
Volkswagen Golf, MK7 2.0 GTI Clubsport S Hatchback FWD 2016-
Volkswagen Golf, MK7 2.0 GTI Performance Pack Hatchback FWD 2013-
Volkswagen Golf, MK7 2.0 R 360S 4motion Estate 4MOTION 2016-
Volkswagen Golf, MK7 2.0 R 360S 4motion Hatchback 4MOTION 2016-
Volkswagen Golf, MK7 2.0 R 4motion Estate 4MOTION 2015-
Volkswagen Golf, MK7 2.0 R 4motion Hatchback 4MOTION 2013-
Volkswagen Golf, MK7 2.0 TDI Estate FWD 2013-2016
Volkswagen Golf, MK7 2.0 TDI Hatchback FWD 2012-2016
Volkswagen Golf, MK7 2.0 TDI Estate FWD 2013-
Volkswagen Golf, MK7 2.0 TDI Hatchback FWD 2012-
Volkswagen Golf, MK7 2.0 TDI 4motion Estate 4MOTION 2013-
Volkswagen Golf, MK7 2.0 TDI 4motion Hatchback 4MOTION 2012-
Volkswagen Tiguan, AD 1.4 TSI SUV FWD 2016-
Volkswagen Tiguan, AD 2.0 TDI 4motion SUV 4MOTION 2016-2020
Volkswagen Tiguan, AD 2.0 TSI 4motion SUV 4MOTION 2016-
Volkswagen Caddy, MK3 TYP 2K Facelift 1.2 TSI Van FWD 2015-2021
Volkswagen Caddy, MK3 TYP 2K Facelift 1.4 TSI MPV FWD 2015-2021
Volkswagen Caddy, MK3 TYP 2K Facelift 1.4 TSI Van FWD 2015-2021
Volkswagen Caddy, MK3 TYP 2K Facelift 2.0 TDI Van FWD 2015-2020
Volkswagen T-ROC, A11 1.0 TSI SUV FWD 2017-
Volkswagen T-ROC, A11 1.0 TSI 4motion SUV 4MOTION 2019-
Volkswagen T-ROC, A11 1.5 TSI SUV FWD 2017-
Volkswagen T-ROC, A11 1.5 TSI 4motion SUV 4MOTION 2018-
Volkswagen T-ROC, A11 1.6 TDI SUV FWD 2018-
Volkswagen T-ROC, A11 2.0 TDI SUV FWD 2018-
Volkswagen T-ROC, A11 2.0 TDI 4motion SUV 4MOTION 2017-
Volkswagen T-ROC, A11 2.0 TSI 4motion SUV 4MOTION 2017-

These arms have inbuilt caster and camber change and are designed to move the lower ball joint forward and out to increase the caster by 1 Degree and induce a negative camber change of up to 0.5 Degrees. These enhancements are the optimal settings over standard to produce a better handling vehicle. SuperPro has stringently tested these control arms on the Golf 7 GTi, R and Audi A3 RS3 in both standard configuration and with lowered springs. The sub frame in these vehicles has no positive location and there is a lot of movement allowable in the bolt holes. Therefore, it is critical that sub frame is not misaligned during re-installation. For this reason and for proper clearance it is critical the sub frame be in the most rearward position when torqued up. These arms have not been tested with any aftermarket engine mount packages that may cause a sub frame misalignment and care must be taken. The recommended lowered front centre of the wheel is 330mm. See fitting instruction for more

Kit Includes: 2 ARMS



MG Auto Motorsports is an authorised dealer for SuperPro. Buy from us to ensure that you are purchasing a genuine SuperPro product.

SuperPro has the largest range of aftermarket polyurethane bushes available and are currently manufacturing more than 6500 products at their own facility in Brisbane, Australia.

The benefits of using aftermarket components is that each product is designed from the ground up to exceed standards as a standalone component, rather than as a subordinate component of a larger module (as seen in OE engineering). SuperPro embraces the concept of developing a higher quality, quieter, longer lasting alternative to standard rubber bushings.

All SuperPro products:

  • are made from SuperPro's own proprietary special elastomer-based engineering-grade polyurethane formula
  • exhibit the best characteristics of both rubber and plastic materials due to their unique formulation
  • are a superior alternative to rubber; providing higher-quality quieter, longer lasting bushings with no increase in NVH (Noise, Vibration and Harshness)
  • have superior abrasion resistance to rubber
  • have excellent memory properties
  • are unaffected by extreme temperatures, oils and coolant
  • are not constrained by OE design constraints (mass-production costs, warranty and vehicle assembly factors)

For more information about SuperPro, please visit their website at https://www.superproeurope.com/

Additional information

Part Make

Part Model

, , ,

Part Variant

, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Part Brand

Part Sub Type

Part Type

Car Model

, , ,