Description
The SuperPro Control Arm Inner Bush Kit: Alignment Correction is designed to fit the following vehicles:
Volkswagen Transporter, T5 2.0 TDI Van FWD 2009-2015
Volkswagen Transporter, T5 1.9 TDI Platform/Chassis FWD 2006-2009
Volkswagen Transporter, T5 1.9 TDI Van FWD 2006-2009
Volkswagen Transporter, T5 1.9 TDI Platform/Chassis FWD 2003-2009
Volkswagen Transporter, T5 1.9 TDI Van FWD 2003-2009
Volkswagen Transporter, T5 2.0 BiTDI Platform/Chassis FWD 2009-2015
Volkswagen Transporter, T5 2.0 BiTDI Van FWD 2009-2015
Volkswagen Transporter, T5 2.0 BiTDI 4motion Platform/Chassis 4MOTION 2009-2015
Volkswagen Transporter, T5 2.0 BiTDI 4motion Van 4MOTION 2009-2015
Volkswagen Transporter, T5 2.0 TDI Platform/Chassis FWD 2009-2015
Volkswagen Transporter, T5 2.5 TDI Platform/Chassis FWD 2003-2009
Volkswagen Transporter, T5 2.5 TDI Van FWD 2003-2009
Volkswagen Transporter, T5 2.5 TDI 4motion Platform/Chassis 4MOTION 2004-2009
Volkswagen Transporter, T5 2.5 TDI 4motion Van 4MOTION 2004-2009
Volkswagen Transporter, T5 3.2 4motion Van 4MOTION 2003-2009
Volkswagen Transporter, T5 3.2 V6 Platform/Chassis FWD 2003-2006
Volkswagen Transporter, T5 3.2 V6 Van FWD 2004-2009
Volkswagen Transporter, T6 2.0 TDI Van FWD 2015-
Volkswagen Transporter, T6 2.0 TDI Platform/Chassis FWD 2015-
Volkswagen Transporter, T6 2.0 TDI Platform/Chassis FWD 2016-
Volkswagen Transporter, T6 2.0 TDI Van FWD 2016-
Volkswagen Transporter, T6 2.0 TDI Bus FWD 2015-
Volkswagen Transporter, T6 2.0 TDI 4motion Platform/Chassis 4MOTION 2015-
Volkswagen Transporter, T6 2.0 TDI 4motion Van 4MOTION 2015-
Volkswagen Transporter, T6 2.0 TDI 4motion Platform/Chassis 4MOTION 2016-
Volkswagen Transporter, T6 2.0 TSI Platform/Chassis FWD 2015-
Volkswagen Transporter, T6 2.0 TSI Van FWD 2015-
Volkswagen Transporter, T6 2.0 TSI 4motion Van 4MOTION 2015-
Volkswagen Transporter, T5 2.0 Platform/Chassis FWD 2003-2009
Volkswagen Transporter, T5 2.0 Van FWD 2003-2009
Alignment Correction. Camber & Toe Adjustment. Offset for adjustment – 2mm Toe & 0.5 degree Camber. If lowering your vehicle more than 50mm, you should use these bushes to correct camber issues. Incorrect camber on these vehicles leads to excessive rear tyre wear. These bushes give the wheel alignment technician additional adjustability to bring camber back into range. We recommend fitting these along with SPF4528K. You may also need to purchase the slimline spanner (SPF3850SPK) to allow you to adjust the bushes in-situ on the car.
Kit Includes: 4B,2TOEM Part Number: 7H0501132AOEM Housing Part Number: 7H0501071E & 7H0501072E
MG Auto Motorsports is an authorised dealer for SuperPro. Buy from us to ensure that you are purchasing a genuine SuperPro product.
SuperPro has the largest range of aftermarket polyurethane bushes available and are currently manufacturing more than 6500 products at their own facility in Brisbane, Australia.
The benefits of using aftermarket components is that each product is designed from the ground up to exceed standards as a standalone component, rather than as a subordinate component of a larger module (as seen in OE engineering). SuperPro embraces the concept of developing a higher quality, quieter, longer lasting alternative to standard rubber bushings.
All SuperPro products:
- are made from SuperPro's own proprietary special elastomer-based engineering-grade polyurethane formula
- exhibit the best characteristics of both rubber and plastic materials due to their unique formulation
- are a superior alternative to rubber; providing higher-quality quieter, longer lasting bushings with no increase in NVH (Noise, Vibration and Harshness)
- have superior abrasion resistance to rubber
- have excellent memory properties
- are unaffected by extreme temperatures, oils and coolant
- are not constrained by OE design constraints (mass-production costs, warranty and vehicle assembly factors)
For more information about SuperPro, please visit their website at https://www.superproeurope.com/
